This spec is a heavy duty concrete protection system that is suitable in moderate to severe internal environments. It may be applied with roller and brush or airless spray. It provides a hard wearing surface with good cleaning properties and an excellent appearance. It is available in any colour, and comes with a gloss finish.

Surface Preparation:

Thoroughly “key” and clean surface to be coated. Suitable preparation methods include acid washing and diamond grinding

Application:

1st Coat – apply Envirothane 4001 Epoxy Penetrating Primer to a minimum dry film thickness of 1000 microns. Allow overnight dry.

The coverage rate is 5-10m² per litre

2nd Coat – apply Envirothane 4110 Heavy Duty Topcoat to a minimum dry film thickness of 170 microns.

The coverage rate is 4-6m² per litre

3rd Coat – apply Envirothane 4110 Heavy Duty Topcoat to a minimum dry film thickness of 170 microns.

The coverage rate is 4-6m² per litre

Applications:

  • Concrete floors in factories
  • warehouses
  • jails
  • washroom floors and walls
  • shopping centres, etc.

Products

E4001 Two Pack 100% Solid Epoxy Penetrating Primer

Is a clear two pack, solvent free, 100% solids epoxy with excellent penetration, surface hardness and adhesion to concrete substrates. ENVIROSET 4001 exhibits high water resistance, chemical and oil resistance.

Click E4001 TECHNICAL DATA SHEET
E4110 Two Pack Pigmented Solvent Free Epoxy Coating

Is a two pack pigmented, solvent free, 100% solids epoxy with excellent surface hardness and adhesion. It exhibits high water resistance, chemical and oil resistance with the ability to build virtually unlimited film thickness.

Click ENVIROSET E4110 TECHNICAL DATA SHEET

Generic Paint Specification

Generic Paint Specification 3019- E4001, E4110 Coloured Internal Concrete Coating

This spec is a heavy duty concrete protection system that is suitable in moderate to severe internal environments. It may be applied with roller and brush or airless spray. It provides a hard wearing surface with good cleaning properties and an excellent appearance. It is available in any colour, and comes with a gloss finish.

Click gps 3019 data sheet

About Concrete Floor Coatings

We have durable and decorative concrete floor coatings for most applications.

Floor coatings have a range of features and benefits. You can use them for a variety of applications. From protecting the surface of areas with high traffic volumes, to improving the look and feel of your workplace, you can find many good uses for our concrete coatings.

Some defining criteria are: Interior or Exterior, water based or solvent based or 100% solids, clear or colour, pedestrian only, light, medium or heavy duty, food preparation area etc.

Related Products

E4001 Two Pack Clear Solvent Free Epoxy Primer – Low Viscosity 3:1 Ratio

E4110 Two Pack Solvent Free White Colour Epoxy Primer – 3:1 Ratio