AcryGlaze Flat Clear Acrylic Enamel 10L - Fisher Group

AcryGlaze Flat Clear Acrylic Enamel 10L

Clear Acrylic Enamel that can be used to enhance and develop colour and texture on a wide range of substrates by using different application techniques.

It dries to an exceptionally tough finish.

Available in Flat and Gloss.

$175.00

In stock

  • Next day delivery
  • Top quality products
  • Money back guarantee

AcryGlaze Flat combines the toughness of enamel paint with the ease of an acrylic paint.

It is a water based alternative to clear solvent systems and is particularly suited to interior applications over dressed timber and wooden joinery.

download product specification Download material safety data
Weight10 kg
Product Features

Tough film – high resistance to damage
Fast dry – quicker job turnaround
Low odour – reoccupy times reduced
Clarity stable – will not yellow

Typical Area of Use

Protecting movie/TV set construction materials and paint work
Developing the grain and protecting interior timber trim and doors
Enhancing the natural beauty of stone work
Protective over coating for paint effects

Gloss

Gloss level and description – matt 5-7% @ 60 degrees

Film Properties

Heat resistance – 70˚C maximum
Water resistance – excellent – suitable for all internal
wet areas such as bathrooms, laundries and kitchens
Chemical resistance – resistant to household
cleaners: avoid acids and alcohols
Solvent resistance – poor resistance to strong solvents

Surface preparation

General preparation of the surface to be painted should be completed before commencing application.
All loose material must be removed and surface damage or imperfections made good.
The surface must be clean, dry and free of contaminants.

Paint requirements

New timber joinery and doors
3 coats at 12–15 square meters per litre per coat
Sand between coats if grain raising occurs

Paint effects
Compatibility should be evaluated before proceeding 2–3 coats 12–15 square meters per litre per coat

Application schedule

Touch dry 15 minutes
Re-coat time (minimum) 2 hours
Curing time 7 days
Practical coverage 12–15 square meters per litre
Dry film thickness @ 12 square meters per litre 22 microns per coat
Application is not recommended if the surface and/or air temperature is less than 10˚C or is liable to fall below 10˚C during the drying period.

Application methods

Good quality paint or cutting in brush
Short nap roller – 6mm–10mm

Airless spray minimum 133 bars (2,000lb/sq in)
Tip size 13–17 tho

Clean up and thinning

Clean up all equipment with water.
On very dry substrates or, in warm and/or low humidity, AcryGlaze Flat may be thinned by the addition of up to 50mls of water per litre.
Hot weather – thinners may be added during very hot weather at the rate of up to 50mls per litre.
Excessive thinning will lengthen drying times and may have a detrimental impact on handling characteristics.

Safety

Read label before use and keep out of reach of children.
If medical advice is needed: have product container or label at hand.
Wear protective clothing such as overalls, goggles and gloves and ventilate working areas.
Wash any paint deposits off skin.
If sanding wear face mask to avoid inhaling dust particles.

Precautions

AcryGlaze Flat is not recommended for exterior use

Environmental Qualities

Manufactured in a carbon neutral certified facility – ISO 14064-1
VOC 18gms per litre EC07-13
Ecolabel certified – Environmental Choice EC07-13
Licence number 0703012