Coloured Gloss Epoxy Coating - E2200 | Duraspec New Zealand

Enviroset 2200 – Coloured Gloss Epoxy Coating

The full gloss, smooth finish of Enviroset 2200 provides an excellent balance between cleanability and safety when used with anti-slip media.

  • Suitable as primer and top coat
  • Safe and easy application
  • Available in any colour
  • Suitable for use with anti-slip media
  • Enviro-friendly
  • Chemical resistant
  • Easy to clean and maintain
  • Compatible with line marking
  • Gloss Finish

 

$573.00

Clear
  • Next day delivery
  • Top quality products
  • Money back guarantee

Coloured Epoxy Coating Gloss

E2200 Coloured Gloss Epoxy Coating Typical Applications:

  • Showrooms
  • Entrance Lobbies
  • Schools
  • Supermarkets
  • Food Prep Areas and Canteens
  • Workshops and laboratories
  • Car parks

This pigmented full gloss epoxy coating is available in any colour and is the most appropriate choice for medium to heavy duty coloured applications where cleanability is a prime requirement e.g. in factories for food preparation and laboratories. Enviroset 2200 has low odour, is safe and easy to apply and low VOC certification is available for GreenStar projects. While Enviroset 2200 provides an extremely durable surface, extra wear for higher traffic areas can be achieved by applying further topcoats – e.g. in doorways and in machine operating areas. Click to see more information 

It is very easy and safe to use, and may be applied with roller and brush or airless spray. It provides a hard-wearing surface with good cleaning properties and an excellent appearance. It is available in any colour, and is gloss finish. Being a glossy finish this means that it is very easy to clean.

What Is Epoxy Floor Coating?

Epoxy floor coating is formulated using various combinations of epoxide resins, additives, fillers, and polyamine or polyamide hardener. When all these materials are mixed, the resultant chemical reaction provides distinct qualities to a floor. Out of all these qualities, surface endurance and stability are the most important. This process creates a firm bond, curing and sealing the surface.

Application:

1st Coat – apply Envirothane 2200 to a minimum dry film thickness of 40 microns. The coverage rate is 5-6m2 per litre. Allow overnight dry

2nd Coat – apply Envirothane 2200 to a minimum dry film thickness of 50 microns. The coverage rate is 5-6mper litre. Rough floors or extra high wear areas will benefit with a higher build applied over two coats.

download technical data sheet
School Epoxy Floor Coating Non SLip

Enviroset 2200 – Coloured Gloss Epoxy Coating Specification 

This spec is a medium duty concrete protection system that is suitable in internal environments. It is very easy and safe to use, and may be applied with roller and brush or airless spray. It provides a hard wearing surface with good cleaning properties and an excellent appearance. It is available in any colour, and is satin finish.

Download E2200 Coating Specification
Size

4L, 20L

Colour

Any Colour

Finish

Gloss

Coverage Rate

6 – 10m²/litre @ 40 to 60m DFT (100 – 170 m WFT)

Pot Life

1 [email protected]ºC

Mixing

Blend Pack A with Pack B 1:1 and power stir thoroughly for at least 2 minutes. The first coat can normally be walked on after 5-6 hours and the second coat applied. The floor is then ready to take light to medium traffic after 24 hours. Potlife time must be closely monitored as water based epoxies may not go hard at the end of the Potlife.