Primer Epoxy Coating
E4001 Epoxy Coating Primer Typical Appliations:
- Heavy manufacturing plants
- Water treatment plants
- Butcheries and abattoirs
- Chemical storage and battery charge areas
- Workshops and laboratories
- Public Amenities
- Truck loading areas
- Wash bays
A & I Coatings Enviroset 4001 is a clear two-pack, solvent-free, 100% solids Epoxy Coating Primer with excellent penetration, surface hardness and adhesion to concrete substrates. Enviroset 4001 exhibits a tolerance to concrete slabs which are damp or slightly contaminated with oils, chemicals and other contaminants. This innovative Epoxy Coating Primer is low odour and low VOC, is user friendly and can be over coated with a wide variety of topcoats. Click to see more information
It is very easy and safe to use, and may be applied with roller and brush or airless spray. It provides a hard-wearing surface with good cleaning properties and an excellent appearance.
What Is Epoxy Floor Coating?
Epoxy floor coating is formulated using various combinations of epoxide resins, additives, fillers, and polyamine or polyamide hardener. When all these materials are mixed, the resultant chemical reaction provides distinct qualities to a floor. Out of all these qualities, surface endurance and stability are the most important. This process creates a firm bond, curing and sealing the surface.
1st Coat – apply Envirothane 4001 Epoxy Penetrating Primer to a minimum dry film thickness of 1000 microns. Allow overnight dry. The coverage rate is 5-10m² per litre
2nd Coat – apply Envirothane 4110 Heavy Duty Topcoat to a minimum dry film thickness of 170 microns. The coverage rate is 4-6m² per litre
3rd Coat – apply Envirothane 4110 Heavy Duty Topcoat to a minimum dry film thickness of 170 microns. The coverage rate is 4-6m² per litredownload technical data sheet