Ultra-Durable Coloured Epoxy Coating
E4110 Ultra-Durable Coloured Epoxy Coating Typical Applications:
- Heavy manufacturing plants
- Entrance Lobbies
- Water treatment plants
- Butcheries and abattoirs
- Chemical storage
- Workshops and laboratories
- Public Amenities
- Truck loading areas
- Wash bays
Enviroset 4110 is a premium solvent-free epoxy which provides extra heavy-duty protection for high wear industrial floors and areas where chemical spillage is anticipated. Enviroset 4110 can be tinted to almost any colour and is usually used as a topcoat over concrete floors which have been primed with Enviroset 4111 or Enviroset 2100. Substantial film builds can be achieved with Enviroset 4110 and it is very effectively used with anti-slip media. It is low odour and safe to use, and low VOC certification is available for GreenStar projects. Click to see more information
It is very easy and safe to use, and may be applied with roller and brush or airless spray. It provides a very hard-wearing surface with good cleaning properties and an excellent appearance. It is available in any sheen.
A & I Coatings ENVIROSET 4110 is a coloured two-pack, solvent-free, 100% solids epoxy with excellent surface hardness and adhesion. It exhibits high water resistance, chemical and oil resistance with the ability to build virtually unlimited film thickness
Epoxy floor coating is formulated using various combinations of epoxide resins, additives, fillers, and polyamine or polyamide hardener. When all these materials are mixed, the resultant chemical reaction provides distinct qualities to a floor. Out of all these qualities, surface endurance and stability are the most important. This process creates a firm bond, curing and sealing the surface.
1st Coat – apply Envirothane 4001 Epoxy Penetrating Primer to a minimum dry film thickness of 1000 microns. Allow overnight dry. The coverage rate is 5-10m² per litre
2nd Coat – apply Envirothane 4110 Heavy Duty Topcoat to a minimum dry film thickness of 170 microns. The coverage rate is 4-6m² per litre
3rd Coat – apply Envirothane 4110 Heavy Duty Topcoat to a minimum dry film thickness of 170 microns. The coverage rate is 4-6m² per litredownload technical data sheet
Enviroset 4110 – Ultra-Durable Coloured Epoxy Coating Specification
This spec is a heavy duty concrete protection system that is suitable in moderate to severe internal environments. It may be applied with roller and brush or airless spray. It provides a hard wearing surface with good cleaning properties and an excellent appearance. It is available in any colour, and comes with a gloss finish.