Floor Coating: E4111 Two Pack Solvent Free Clear Epoxy Primer – Low Viscosity 3:1 Ratio

Is a two pack water borne very clear epoxy coating with excellent film properties and surface hardness. This self priming and environmentally friendly coating system is ideal as a floor coating with excellent adhesion and chemical resistance.



In stock

  • Next day delivery
  • Top quality products
  • Money back guarantee

E4111 Two Pack Solvent Free Epoxy Primer – Low Viscosity 3:1 Ratio

Is a clear two pack, solvent free, 100% solids epoxy with excellent surface hardness and adhesion. It exhibits high water resistance, chemical and oil resistance with the ability to build virtually unlimited film thickness

Uses and Benefits:

  • Can be used as an intermediate coat and also as a topcoat for A & I Coatings high performance coating system
  • Exceptionally hard wearing.
  • Exceptional filling characteristics when mixed with sand


  • Concrete protection
  • Floor Coatings
  • Joint repair
  • Steel in extreme environments
  • Repaints/ maintenance
  • Wear resistant coating
download technical data sheet


Theoretical Coverage

10m? /[email protected]?mDFT (100?mWFT). Dependant on application


Mixing: Blend Pack A with Pack B to correct ratio. Power stir thoroughly for at least two minutes prior to use. Allow to stand for 10 minutes in cold weather. Only mix required amount and use within the stated pot life. Add sand as necessary and stir in. If using as an epoxy mortar mix up to 4 parts sand to 1 part epoxy. For self levelling application mix up to 2 parts mixed epoxy to 1 part sand. Application: Airless spray, brush or roller. Trowel when used as a mortar. Note: If airless spray running too hot, it may set off a faster cure time. Thinning V122 Epoxy Thinners or Methylated Spirits. Cleaning Use V105 or V114 thinners for clean up.