Floor Coating: E8476 Two Pack Water Based Polyurethane Clear Full Gloss - 6:1 Ratio - Fisher Group

Floor Coating: E8476 Two Pack Water Based Polyurethane Clear Full Gloss – 6:1 Ratio

Is a two pack water borne epoxy coating with excellent film properties and surface hardness. It is a self priming and environmentally friendly coating system which is ideal as a floor coating, due to its excellent adhesion and chemical resistance. It can be tinted to an unlimited colour range.

 

$376.74

  • Next day delivery
  • Top quality products
  • Money back guarantee

E8476 Two Pack Water Based Polyurethane Clear Full Gloss 6:1 Ratio Coating

Is a water borne two pack polyurethane coating which gives excellent adhesion, barrier and film properties on a variety of substrates. It is easy to use and environmentally friendly, with the added benefit of durability, good yellowing and UV resistance on exterior exposure. It has good abrasion and chemical resistance.

Uses:

• Cabinetry and joinery
• Architectural and decorative steelwork
• Concrete and masonry topcoat

Benefits:

1. Excellent weathering performance
2. High gloss up to 92% 60º can easily be achieved
3. Good chemical resistance
4. Good mechanical properties

Limitations:

1. Not to be applied at very low temperatures or high humidity (<10ºC and over 75% R.H.)
2. Prone to bubbling if applied too thick (over 400 micron WFT)
3. Excessive thickness could cause whitening

download technical data sheet
Sizes

7L

Theoretical Coverage

8.2m²/[email protected] 50µm DFT(120µmWFT) for clear

Application

Mixing Power – stir Pack A with Pack B thoroughly for at least 2 minutes, without causing an excess of foam, before thinning. Thin 5-
10% with water as necessary and gently stir.
Application – Air or Airless Spray, brush, or roller. (A & I Coatings technical staff can advise on the most appropriate equipment for a
specific task).
Thinning – Water
Cleaning – Water
Typical Specification – Concrete coating:
– One coat E2100 undercoat applied as per E2100 TDS (or E2000 for clear).
– One coat E8476 topcoat at 50 micron DFT. Fully cured in 7 days.

Colour

Clear

Finish

Gloss (Full)