Nutech NuCourt Fill Coat

High solids acrylic build coat developed specifically for a squeegee or brush application to hard sports surfaces

No Stock Available – please call us at 0223904211 or email [email protected] to order



  • Next day delivery
  • Top quality products
  • Money back guarantee

NuCourt Roll Coat?is a water-based acrylic coating developed specifically for short nap roller applications to asphalt and concrete sports surfaces.

Used in conjunction with the?NuCourt Range?of products as a complete finishing system,

NuCourt Roll Coat?will provide a long-lasting, resilient surface that is non-slip.

NuCourt Roll Coat?is manufactured in black, white and?six industry standard colours. For large scale projects, custom tinting is available upon request.

Typical applications including:

  • Tennis Court Surfaces
  • Sport Surfaces
  • Concrete Surfaces
  • Asphalt Courts


  • Low VOC
  • Specifically designed for hard sports surfaces
  • Developed for roller application
  • UV stable and non-fading
  • Can be line marked with?NuCourt Line Marking
  • Suitable for all weather conditions
  • Excellent protection against bacteria and mould
  • High build, smooth surface coating

Suitable Surfaces


Colored Finish
Sports Surfaces


Download Technical Data Sheet

Download Safety Data Sheet


NuCourt Paints

Coloured viscous liquid





Film Forming Temperature


Dry Film Thickness

200 microns

Coats Required

2 Coats

Recoat Time

8 – 24 Hours

Touch Dry

4 Hours

Full Cure

7 Days

VOC Levels




Ambient Application Temperature

12?C – 30?C

Coverage Rate



4L, 10L

Application Guide

The surface must be clean and free of all lichen, moss, grease, oil, chewing gum, silicon and other foreign matter.

Moss and Lichen Contamination: Use Nutech Hypo in accordance with the relevant TDS allowing the surface to thoroughly dry after preparation is complete.

Grease & Oil: Use Nu-EcoSafe Degreaser in accordance with the relevant TDS.

High-pressure water blast > 2500 PSI to remove any grease, oil, food or stains. Allow to thoroughly dry.

Repair: All non-structural cracking and any surface damage. Nutech Paint recommends seeking professional advice regarding any structural or drainage issues prior to commencement of works.

Any ponding of water deeper than 20mm will require patch repairing.
Where the existing coating has been removed patch repair the surface using NuCourt Fill Coat in accordance with the relevant TDS

For preparation specific to concrete or asphalt surfaces, refer to the TDS

First Coat: Apply 1 coat NuCourt Roll Coat
Pour a windrow of NuCourt Roll Coat parallel to the court edge.
Apply even downward pressure and avoid leaving thick film sections on either side of the applicator.
Walking in the direction of the windrow, spread with the applicator to obtain an even cover then, reverse direction.
Always maintain a wet edge
Allow the coat to dry.
After the coating is dry, inspect the surface and scrape or grind off any excess lumps or irregularities

Second Coat: Apply NuCourt Roll Coat in the above-described method.
Top Coat Pre – Existing Surfaces:
In accordance with the methods described in the TDS

For preparation guidelines specific to concrete or asphalt surfaces, consult the TDS prior to application