For Raw or Smooth Concrete Effect: Top Coating - Fisher Group

For Raw or Smooth Concrete Effect: Top Coating

TM108 (Transparent in Matt Finish Monocomponent)

 

$165.46$463.97

Clear
  • Next day delivery
  • Top quality products
  • Money back guarantee

Raw Concrete Effect Decorative Paint and Resin Application

RAW CONCRETE has the look and feel of new cement. It is matt in its appearance with a surface that is slightly rough to the touch.

The painting cycle is simple and it allows the user to obtain a realistic concrete finish even on large surfaces.

The effect can be painted in different colors, depending on the project requirements.

The end result is a very realistic concrete surface that is durable. As necessary, the application of a protective transparent topcoat will give the surface a higher level of resistance.

This paint can be applied with a Spatula/Trowel or Sprayed.

All TrendyPaints are water-based with low VOC levels so they are environmentally friendly.

Many stylish colours are available and custom colours can be produced by requested.

download technical data sheet Download brochure

Smooth Concrete Effect Decorative Paint and Resin Application

SMOOTH CONCRETE is a delicate and quite soft to the touch. It contains smaller elements for a smoother surface with less texture that is also lighter in color.

The painting cycle is simple and it allows the user to obtain a realistic concrete finish even on large surfaces.

The effect can be painted in different colors, depending on the project requirements.

The end result is a very realistic concrete surface that is durable. As necessary, the application of a protective
transparent topcoat will give the surface a higher level of resistance.

This paint can be applied with a Spatula/Trowel or Sprayed.

All TrendyPaints are water-based with low VOC levels so they are environmentally friendly.

Many stylish colours are available and custom colours can be produced by requested.

download technical data sheet Download brochure
WeightN/A
Sizes

5L, 15L

Coverage

8-10 m2/kg in one layer

Application

• About 5-10 hours after applying the BASE R33, it is recommended to apply the clear transparent TM108 for more resistance
• Add water to dilute the transparent at 5-10%, if necessary
• If you want a smoother surface, you can sand the surface with P180 grit sandpaper before applying the transparent. After sanding, wipe with a dry or lightly wet lint free cloth.
• Apply the paint in 1 coat using a short pile roller
• If the surface is not perfectly even, apply a second coat, add about 20-30% more water to dilute the paint
• After each application, the roller should be washed with warm water and soap.
• SPRAYING APPLICATION: Mix with about 10%-20% water